¥15,000
App Store で開く
iPhone / iPad 対応
59.4MB
年齢4+
K4 Control for Elecraft K4はどんなアプリ？
K4 Control for Elecraft K4は、iPadから無線機を操作するための専用アプリです。
インターネット経由で遠隔地の無線機を操作したり、自宅の機器を操作したりする際に助けになります。外部ソフトを介さずとも、FT8やCWといったデジタルモードをそのまま扱える機能が入っています。ログブックには自動記録やADIF形式での書き出しが含まれるため、運用の記録を効率的に管理できます。二つのVFO設定やリアルタイムのウォーターフォール表示を確認しながら、詳細な周波数情報を把握できる仕組みです。
外出先からでも無線機の状態を把握したい場面や、特定のコールサインに対する通知を受け取りたい時に活躍します。地図上で方向データを確認しながら運用する際に、情報の視認性を高めてくれます。移動中や遠隔地からでも、安定した操作環境を確保したいアマチュア無線家向けです。
アノアプリによる紹介文です。デベロッパー公式の説明はApp Storeでご確認いただけます。
K4 Control for Elecraft K4の注目ポイント
iPad専用の操作アプリ
iPad端末からElecraft K4を操作するための専用アプリです。タブレットの画面を使いながら無線機の操作を一元管理できます。
遠隔地からの無線機操作
インターネットを経由して自宅や外出先から無線機を動かします。離れた場所からでもネットワークを通じて機器の状態を操作できます。
デジタルモードの直接操作
FT8やCWといったデジタルモードを外部ソフトなしで扱えます。標準的な機能としてこれらの通信をそのまま処理する機能が入っています。
自動記録とADIF形式の書き出し
ログブックに自動で記録を残し、ADIF形式での書き出しも行えます。運用の記録を管理する際にデータを他のソフトへ移す手間が省けます。
価格履歴
今の価格は15,000円です。過去134日間、価格は変わっていません。
アノアプリが独自に収集した価格履歴をもとに分析しています。
- 買い時判定
- 通常価格
- 記録期間
- 134日
- 最頻価格
- ¥15,000
- 記録上の最安値
- ¥15,000
価格更新履歴
| 日付 | 価格 |
|---|---|
| 2026-06-17 | ¥15,000 |
ランキング推移
ランキングデータがありません。
ランキング圏内（100位以内）に入ると記録が開始されます。
ユーザーレビュー （当サイト投稿）
まだレビューがありません。最初のレビューを書いてみましょう。
アプリ更新履歴 活発に更新中
Ver 27.0.10 2026-10-28
This update contains the following changes and improvements:
◉ A new look: the app now follows Apple's own iOS design, in light and dark mode, on the iPad and the iPhone
◉ New tab bar with Waterfall, Modes, Tools and Settings
◉ Modes and tools keep running when you leave their screen; a green dot on the tile shows which ones are running
◉ Runs on Apple Vision Pro
◉ New on iOS: JS8 and Speech (iOS 26); CW and HF-Fax renewed (CW with decoder and CW keyboard)
◉ CW: improved decoder
◉ CW: the new ESM mode (Enter Sends Message)
◉ Fixed: SSTV and HF-Fax could not save received pictures into Photos
◉ All tools redesigned: DX Cluster, POTA, PSK Reporter, Band Plan, Call Lookup, Logbook, Network Stats, Memories, Command Bar, Ultra Beam, Genius (4O3A) and the controllers
◉ Several MIDI controllers can be used at the same time
◉ The radio controls are now compact floating panels (Tuning, PTT, CW, Memories, Tune Stack, Macros, Command Bar, DTMF, RIT / ∆TX)
◉ The band plan is shown on the waterfall as a coloured ribbon
◉ Demo radio: try the app without a radio
◉ The radio keeps playing in the background, for example with the iPad cover closed or the screen locked
◉ Fixed: the audio didn't come back after a phone call or after an interruption by another app
◉ New audio settings: Speaker and Microphone
◉ New controller actions: RIT Up / Down, Main Audio Mute toggle, Clear Log Window, Memory Up / Down; knobs on RIT / XIT change it in 10 Hz steps from the current offset
◉ Memories: Save only stores the channel and no longer tunes the radio
◉ WSPR: received spots reach WSPRnet again; the status line shows the result
◉ Better VoiceOver support
◉ Prevent device sleep in the settings
◉ The manual has been updated
◉ Ready for iPhone Duo: the radio screen, the modes and the tools use the whole screen, folded and open
◉ Waterfall: the level slider, S.Menu and the zoom buttons are now at the left; drag the edge between scope and waterfall to change their sizes
◉ SSTV: new receiver for all modes, including Robot 36 (the mode the ISS sends); pictures start in the right place by themselves, also with weaker signals, and the sender's call sign (FSK ID) is shown
◉ SSTV: every mode can now be sent, including Robot 36, Robot 72, Robot 24 and PD-50 to PD-290
◉ FT8-Improved: Auto CQ answers callers while "Only Show CQ" or "Only Show Containing" is on; touch and hold the filter button to switch the filter on or off
◉ JS8: the correct grid locator is sent south of the equator
◉ WSPR: the radio goes back to receive after each transmission
◉ PSK Reporter: changing the time, band or mode in the filter loads the list again
◉ Logbook: QSL "sent" marks of the iCloud log are no longer lost after an app update
◉ Alerts with states, grid locators or countries no longer ring for stations where these are unknown
◉ Network Stats: a Saved Radios section shows whether each of your saved radios answers, also while not connected
◉ Available Radios: a dot before each radio shows whether it answers, its address below the name
◉ Before connecting, the app tells you when the radio's password is missing
◉ If the radio doesn't answer, the connection ends with a message
◉ Radio passwords are kept in the radio list in iCloud again, so all your devices have them
◉ Antenna Genius with firmware 4.1.9: a tap selects the receive antenna, while transmitting the transmit antenna
◉ MIDI controllers such as the HaliKey MIDI connect more reliably
◉ Fixed: the NR / NRS button showed the wrong state after start
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ A new look: the app now follows Apple's own iOS design, in light and dark mode, on the iPad and the iPhone
◉ New tab bar with Waterfall, Modes, Tools and Settings
◉ Modes and tools keep running when you leave their screen; a green dot on the tile shows which ones are running
◉ Runs on Apple Vision Pro
◉ New on iOS: JS8 and Speech (iOS 26); CW and HF-Fax renewed (CW with decoder and CW keyboard)
◉ CW: improved decoder
◉ CW: the new ESM mode (Enter Sends Message)
◉ Fixed: SSTV and HF-Fax could not save received pictures into Photos
◉ All tools redesigned: DX Cluster, POTA, PSK Reporter, Band Plan, Call Lookup, Logbook, Network Stats, Memories, Command Bar, Ultra Beam, Genius (4O3A) and the controllers
◉ Several MIDI controllers can be used at the same time
◉ The radio controls are now compact floating panels (Tuning, PTT, CW, Memories, Tune Stack, Macros, Command Bar, DTMF, RIT / ∆TX)
◉ The band plan is shown on the waterfall as a coloured ribbon
◉ Demo radio: try the app without a radio
◉ The radio keeps playing in the background, for example with the iPad cover closed or the screen locked
◉ Fixed: the audio didn't come back after a phone call or after an interruption by another app
◉ New audio settings: Speaker and Microphone
◉ New controller actions: RIT Up / Down, Main Audio Mute toggle, Clear Log Window, Memory Up / Down; knobs on RIT / XIT change it in 10 Hz steps from the current offset
◉ Memories: Save only stores the channel and no longer tunes the radio
◉ WSPR: received spots reach WSPRnet again; the status line shows the result
◉ Better VoiceOver support
◉ Prevent device sleep in the settings
◉ The manual has been updated
◉ Ready for iPhone Duo: the radio screen, the modes and the tools use the whole screen, folded and open
◉ Waterfall: the level slider, S.Menu and the zoom buttons are now at the left; drag the edge between scope and waterfall to change their sizes
◉ SSTV: new receiver for all modes, including Robot 36 (the mode the ISS sends); pictures start in the right place by themselves, also with weaker signals, and the sender's call sign (FSK ID) is shown
◉ SSTV: every mode can now be sent, including Robot 36, Robot 72, Robot 24 and PD-50 to PD-290
◉ FT8-Improved: Auto CQ answers callers while "Only Show CQ" or "Only Show Containing" is on; touch and hold the filter button to switch the filter on or off
◉ JS8: the correct grid locator is sent south of the equator
◉ WSPR: the radio goes back to receive after each transmission
◉ PSK Reporter: changing the time, band or mode in the filter loads the list again
◉ Logbook: QSL "sent" marks of the iCloud log are no longer lost after an app update
◉ Alerts with states, grid locators or countries no longer ring for stations where these are unknown
◉ Network Stats: a Saved Radios section shows whether each of your saved radios answers, also while not connected
◉ Available Radios: a dot before each radio shows whether it answers, its address below the name
◉ Before connecting, the app tells you when the radio's password is missing
◉ If the radio doesn't answer, the connection ends with a message
◉ Radio passwords are kept in the radio list in iCloud again, so all your devices have them
◉ Antenna Genius with firmware 4.1.9: a tap selects the receive antenna, while transmitting the transmit antenna
◉ MIDI controllers such as the HaliKey MIDI connect more reliably
◉ Fixed: the NR / NRS button showed the wrong state after start
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Ver 1.151 2026-09-04
This update contains the following changes and improvements:
◉ Added a Terminal mode for APRS. You can now connect to BBSes or start a keyboard-to-keyboard session with another ham radio operator.
◉ APRS can now auto-repeat position and status reports.
◉ The APRS RX button now indicates a transmission, providing clearer feedback.
◉ Additional APRS improvements and refinements.
◉ For the RIT/XIT view there is now a setting for defining minimum and maximum RIT/XIT values, improving support for satellite operation.
◉ Command Bar improvements.
◉ PTT Double-Tap has been removed for a better PTT button experience.
◉ The “Available Radios” screen now remembers the last connection so you can just hit the Connect button in case you like to connect with the same Radio
◉ Additional changes in preparation for an upcoming iOS release.Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ Added a Terminal mode for APRS. You can now connect to BBSes or start a keyboard-to-keyboard session with another ham radio operator.
◉ APRS can now auto-repeat position and status reports.
◉ The APRS RX button now indicates a transmission, providing clearer feedback.
◉ Additional APRS improvements and refinements.
◉ For the RIT/XIT view there is now a setting for defining minimum and maximum RIT/XIT values, improving support for satellite operation.
◉ Command Bar improvements.
◉ PTT Double-Tap has been removed for a better PTT button experience.
◉ The “Available Radios” screen now remembers the last connection so you can just hit the Connect button in case you like to connect with the same Radio
◉ Additional changes in preparation for an upcoming iOS release.Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Ver 1.132 2026-07-10
This update contains the following changes and improvements:
◉ Added support for the HaliKey MIDI Keyer USB Controller
◉ Added an additional Azimuth Offset Setting the for Metropwr RT1 Rotator Controller
◉ A warning will now be displayed when the Low Data Mode is enabled
◉ An issue in the POTA Tool when showing a map was fixed
◉ Added Frequencies for 2200m, 630m and 23cm to the WSPR Tool
◉ Improved logbook iCloud handling in case of poor internet access
◉ Logbook export will now also export even wrong or incomplete QSOs
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ Added support for the HaliKey MIDI Keyer USB Controller
◉ Added an additional Azimuth Offset Setting the for Metropwr RT1 Rotator Controller
◉ A warning will now be displayed when the Low Data Mode is enabled
◉ An issue in the POTA Tool when showing a map was fixed
◉ Added Frequencies for 2200m, 630m and 23cm to the WSPR Tool
◉ Improved logbook iCloud handling in case of poor internet access
◉ Logbook export will now also export even wrong or incomplete QSOs
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Ver 1.131 2026-06-19
This update contains the following changes and improvements:
◉ Added support for SSNR (Spectral Subtraction Noise Reduction) as option to the NR button
◉ The Release History feature has been fixed
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ Added support for SSNR (Spectral Subtraction Noise Reduction) as option to the NR button
◉ The Release History feature has been fixed
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Ver 1.130 2026-06-14
This update contains the following changes and improvements:
◉ Implemented some logbook and FT8 improvements
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ Implemented some logbook and FT8 improvements
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
