¥15,000
App Store で開く
iPhone / iPad 対応
59.5MB
年齢4+
TS Control for Kenwoodはどんなアプリ？
TS Control for Kenwoodは、iPadから無線機を遠隔操作するためのユーティリティです。
インターネットを通じて自宅の無線機を遠隔操作できるため、外出先からでも操作ができます。外部ソフトを使わずにFT8やCW、SSTVなどのデジタルモードを扱える機能が入っています。二つのVFO設定とリアルタイムなウォーターフォール表示により、詳細な周波数の見極めも行えます。自動記録に対応したログブックを備えているため、ADIF形式での書き出しもスムーズに行えます。
遠隔地からでも操作の感触を損なわずに通信を楽しみたい場面で頼りになります。キーボードやパドルを介してCW操作を行うなど、高度な運用を求めるアマチュア無線家にも合っています。
アノアプリによる紹介文です。デベロッパー公式の説明はApp Storeでご確認いただけます。
TS Control for Kenwoodの注目ポイント
遠隔地からの無線機操作
インターネットを通じて自宅の無線機を操作する仕組みです。外出先からでもiPadを介して通信を行えるため、場所を選ばず運用に集中できます。
各種デジタルモードへの対応
FT8やCWといったデジタルモードを外部ソフトなしで扱えます。iPad単体で操作を完結できるため、複雑な設定なしで通信の準備が進みます。
自動記録とADIF形式への対応
ログブックの自動記録やADIF形式での書き出しが行えます。通信記録を正確に残し、後からデータを取り込む作業もスムーズに進みます。
二つのVFOとリアルタイムな表示
二つのVFO設定と動くウォーターフォールを表示しながら周波数を追い込めます。視覚的な情報を頼りに、より正確な信号の確認が行えます。
価格履歴
現在は15,000円です。記録を始めた134日前から、価格は変わっていません。
アノアプリが独自に収集した価格履歴をもとに分析しています。
- 買い時判定
- 通常価格
- 記録期間
- 134日
- 最頻価格
- ¥15,000
- 記録上の最安値
- ¥15,000
価格更新履歴
| 日付 | 価格 |
|---|---|
| 2026-06-17 | ¥15,000 |
ランキング推移
ランキングデータがありません。
ランキング圏内（100位以内）に入ると記録が開始されます。
ユーザーレビュー （当サイト投稿）
まだレビューがありません。最初のレビューを書いてみましょう。
アプリ更新履歴 活発に更新中
Ver 27.0.10 2026-10-28
This update contains the following changes and improvements:
◉ A new look: the app now follows Apple's own iOS design, in light and dark mode, on the iPad and the iPhone
◉ New tab bar with Waterfall, Modes, Tools and Settings
◉ Modes and tools keep running when you leave their screen; a green dot on the tile shows which ones are running
◉ Runs on Apple Vision Pro
◉ New on iOS: JS8 and Speech (iOS 26); CW and HF-Fax renewed (CW with decoder and CW keyboard)
◉ CW: improved decoder
◉ CW: the new ESM mode (Enter Sends Message)
◉ Fixed: SSTV and HF-Fax could not save received pictures into Photos
◉ All tools redesigned: DX Cluster, POTA, PSK Reporter, Band Plan, Call Lookup, Logbook, Network Stats, Memories, Command Bar, Ultra Beam, Genius (4O3A) and the controllers
◉ Several MIDI controllers can be used at the same time
◉ The radio controls are now compact floating panels (Tuning, PTT, CW, Memories, Tune Stack, Macros, Command Bar, DTMF, RIT / ∆TX)
◉ The band plan is shown on the waterfall as a coloured ribbon
◉ Demo radio: try the app without a radio
◉ The radio keeps playing in the background, for example with the iPad cover closed or the screen locked
◉ Fixed: the audio didn't come back after a phone call or after an interruption by another app
◉ New audio settings: Speaker and Microphone
◉ New controller actions: RIT Up / Down, Main Audio Mute toggle, Clear Log Window, Memory Up / Down; knobs on RIT / XIT change it in 10 Hz steps from the current offset
◉ Memories: Save only stores the channel and no longer tunes the radio
◉ WSPR: received spots reach WSPRnet again; the status line shows the result
◉ Better VoiceOver support
◉ Prevent device sleep in the settings
◉ The manual has been updated
◉ Ready for iPhone Duo: the radio screen, the modes and the tools use the whole screen, folded and open
◉ Waterfall: the level slider, S.Menu and the zoom buttons are now at the left; drag the edge between scope and waterfall to change their sizes
◉ SSTV: new receiver for all modes, including Robot 36 (the mode the ISS sends); pictures start in the right place by themselves, also with weaker signals, and the sender's call sign (FSK ID) is shown
◉ SSTV: every mode can now be sent, including Robot 36, Robot 72, Robot 24 and PD-50 to PD-290
◉ FT8-Improved: Auto CQ answers callers while "Only Show CQ" or "Only Show Containing" is on; touch and hold the filter button to switch the filter on or off
◉ JS8: the correct grid locator is sent south of the equator
◉ WSPR: the radio goes back to receive after each transmission
◉ PSK Reporter: changing the time, band or mode in the filter loads the list again
◉ Logbook: QSL "sent" marks of the iCloud log are no longer lost after an app update
◉ Alerts with states, grid locators or countries no longer ring for stations where these are unknown
◉ Network Stats: a Saved Radios section shows whether each of your saved radios answers, also while not connected
◉ Available Radios: a dot before each radio shows whether it answers, its address below the name
◉ Before connecting, the app tells you when the radio's user name or password is missing
◉ If the radio doesn't answer, the connection ends with a message
◉ Radio passwords are kept in the radio list in iCloud again, so all your devices have them
◉ Antenna Genius with firmware 4.1.9: a tap selects the receive antenna, while transmitting the transmit antenna
◉ MIDI controllers such as the HaliKey MIDI connect more reliably
◉ CW texts longer than 24 characters are sent completely
◉ Voice Guidance in the settings shows the radio's setting
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ A new look: the app now follows Apple's own iOS design, in light and dark mode, on the iPad and the iPhone
◉ New tab bar with Waterfall, Modes, Tools and Settings
◉ Modes and tools keep running when you leave their screen; a green dot on the tile shows which ones are running
◉ Runs on Apple Vision Pro
◉ New on iOS: JS8 and Speech (iOS 26); CW and HF-Fax renewed (CW with decoder and CW keyboard)
◉ CW: improved decoder
◉ CW: the new ESM mode (Enter Sends Message)
◉ Fixed: SSTV and HF-Fax could not save received pictures into Photos
◉ All tools redesigned: DX Cluster, POTA, PSK Reporter, Band Plan, Call Lookup, Logbook, Network Stats, Memories, Command Bar, Ultra Beam, Genius (4O3A) and the controllers
◉ Several MIDI controllers can be used at the same time
◉ The radio controls are now compact floating panels (Tuning, PTT, CW, Memories, Tune Stack, Macros, Command Bar, DTMF, RIT / ∆TX)
◉ The band plan is shown on the waterfall as a coloured ribbon
◉ Demo radio: try the app without a radio
◉ The radio keeps playing in the background, for example with the iPad cover closed or the screen locked
◉ Fixed: the audio didn't come back after a phone call or after an interruption by another app
◉ New audio settings: Speaker and Microphone
◉ New controller actions: RIT Up / Down, Main Audio Mute toggle, Clear Log Window, Memory Up / Down; knobs on RIT / XIT change it in 10 Hz steps from the current offset
◉ Memories: Save only stores the channel and no longer tunes the radio
◉ WSPR: received spots reach WSPRnet again; the status line shows the result
◉ Better VoiceOver support
◉ Prevent device sleep in the settings
◉ The manual has been updated
◉ Ready for iPhone Duo: the radio screen, the modes and the tools use the whole screen, folded and open
◉ Waterfall: the level slider, S.Menu and the zoom buttons are now at the left; drag the edge between scope and waterfall to change their sizes
◉ SSTV: new receiver for all modes, including Robot 36 (the mode the ISS sends); pictures start in the right place by themselves, also with weaker signals, and the sender's call sign (FSK ID) is shown
◉ SSTV: every mode can now be sent, including Robot 36, Robot 72, Robot 24 and PD-50 to PD-290
◉ FT8-Improved: Auto CQ answers callers while "Only Show CQ" or "Only Show Containing" is on; touch and hold the filter button to switch the filter on or off
◉ JS8: the correct grid locator is sent south of the equator
◉ WSPR: the radio goes back to receive after each transmission
◉ PSK Reporter: changing the time, band or mode in the filter loads the list again
◉ Logbook: QSL "sent" marks of the iCloud log are no longer lost after an app update
◉ Alerts with states, grid locators or countries no longer ring for stations where these are unknown
◉ Network Stats: a Saved Radios section shows whether each of your saved radios answers, also while not connected
◉ Available Radios: a dot before each radio shows whether it answers, its address below the name
◉ Before connecting, the app tells you when the radio's user name or password is missing
◉ If the radio doesn't answer, the connection ends with a message
◉ Radio passwords are kept in the radio list in iCloud again, so all your devices have them
◉ Antenna Genius with firmware 4.1.9: a tap selects the receive antenna, while transmitting the transmit antenna
◉ MIDI controllers such as the HaliKey MIDI connect more reliably
◉ CW texts longer than 24 characters are sent completely
◉ Voice Guidance in the settings shows the radio's setting
◉ Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Ver 1.151 2026-09-04
This update contains the following changes and improvements:
◉ Added a Terminal mode for APRS. You can now connect to BBSes or start a keyboard-to-keyboard session with another ham radio operator.
◉ APRS can now auto-repeat position and status reports.
◉ The APRS RX button now indicates a transmission, providing clearer feedback.
◉ Additional APRS improvements and refinements.
◉ For the RIT/XIT view there is now a setting for defining minimum and maximum RIT/XIT values, improving support for satellite operation.
◉ Command Bar improvements.
◉ PTT Double-Tap has been removed for a better PTT button experience.
◉ The “Available Radios” screen now remembers the last connection so you can just hit the Connect button in case you like to connect with the same Radio
◉ Additional changes in preparation for an upcoming iOS release.Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ Added a Terminal mode for APRS. You can now connect to BBSes or start a keyboard-to-keyboard session with another ham radio operator.
◉ APRS can now auto-repeat position and status reports.
◉ The APRS RX button now indicates a transmission, providing clearer feedback.
◉ Additional APRS improvements and refinements.
◉ For the RIT/XIT view there is now a setting for defining minimum and maximum RIT/XIT values, improving support for satellite operation.
◉ Command Bar improvements.
◉ PTT Double-Tap has been removed for a better PTT button experience.
◉ The “Available Radios” screen now remembers the last connection so you can just hit the Connect button in case you like to connect with the same Radio
◉ Additional changes in preparation for an upcoming iOS release.Implemented several additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Ver 1.132 2026-07-10
This update contains the following changes and improvements:
◉ Added support for the HaliKey MIDI Keyer USB Controller
◉ Added an additional Azimuth Offset Setting the for Metropwr RT1 Rotator Controller
◉ A warning will now be displayed when the Low Data Mode is enabled
◉ An issue in the POTA Tool when showing a map was fixed
◉ Added Frequencies for 2200m, 630m and 23cm to the WSPR Tool
◉ Improved logbook iCloud handling in case of poor internet access
◉ Logbook export will now also export even wrong or incomplete QSOs
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ Added support for the HaliKey MIDI Keyer USB Controller
◉ Added an additional Azimuth Offset Setting the for Metropwr RT1 Rotator Controller
◉ A warning will now be displayed when the Low Data Mode is enabled
◉ An issue in the POTA Tool when showing a map was fixed
◉ Added Frequencies for 2200m, 630m and 23cm to the WSPR Tool
◉ Improved logbook iCloud handling in case of poor internet access
◉ Logbook export will now also export even wrong or incomplete QSOs
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
Ver 1.130 2026-06-14
This update contains the following changes and improvements:
◉ Implemented some logbook and FT8 improvements
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
◉ Implemented some logbook and FT8 improvements
◉ Implemented some additional improvements and optimizations behind the scenes
Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.
Your continued support and valuable feedback play a crucial role in further improving this app.
73s,
Marcus, DL8MRE
