This update contains the following changes and improvements:

◉ A new look: the app now follows Apple's own iOS design, in light and dark mode, on the iPad and the iPhone

◉ New tab bar with Panadapter, Modes, Tools, Radio and Settings

◉ Modes and tools keep running when you leave their screen; a green dot on the tile shows which ones are running

◉ Runs on Apple Vision Pro

◉ New Speech mode (iOS 26): incoming voice is transcribed and optionally translated, your typed text is sent as speech

◉ New CW mode with decoder, keyer settings, CW keyboard and paddle

◉ CW: improved decoder

◉ CW: the new ESM mode (Enter Sends Message)

◉ HF-Fax and SSTV with new receivers, a frequency list that tunes the radio, and Auto Save into Photos

◉ All tools redesigned: DX Cluster, POTA, PSK Reporter, Band Plan, Call Lookup (with Show on Map), Logbook (with a map of your worked grid squares), Network Stats, Genius, Command Bar, Ultra Beam, HomeKit and the controllers

◉ Several MIDI controllers can be used at the same time

◉ The radio controls (CWX, Tune Stack, Macros, Command Bar, DTMF, RIT / XIT, ESC) are now compact floating panels

◉ The band plan is shown on the Panadapter as a coloured ribbon

◉ Demo radio: try the app without a radio

◉ FlexRadio firmware 4.3: FreeDV modes FDVU / FDVL, filter presets from the radio (editable in the radio settings), advanced DSP settings, Auto AGC-T, Noise Floor Range, PTT Override and CW profiles (depending on the radio's licence)

◉ The radio keeps playing in the background, for example with the iPad cover closed or the screen locked

◉ Fixed: the audio didn't come back after a phone call or after opening the iPad cover

◉ FT8-Improved and JS8 work with a transverter (for example 2 m): they no longer switch the radio to a band it doesn't have

◉ WSPR: received spots reach WSPRnet again; the status line shows the result

◉ New controller commands: RIT / XIT Up and Down, Frequency Up / Down 10x and 100x, CW pitch, Memory 1-10, Memory Up / Down

◉ Controller knobs on RIT / XIT change it in 10 Hz steps, also after Clear

◉ Controller commands CWX, Enter Frequency, Adjust Main Volume and Open Logbook / DX-Cluster / FT8 work on the iPhone and iPad

◉ RF Gain in the slice's antenna pop-up

◉ New: Firmware Update for your radio, in the Radio settings

◉ Ready for iPhone Duo: the Panadapter, the modes and the tools use the whole screen, folded and open; the zoom buttons are now at the bottom left

◉ SSTV: every mode can now be sent, including Robot 36, Robot 72, Robot 24 and PD-50 to PD-290; Robot 36 pictures (the mode the ISS sends) come out right, and the sender's call sign (FSK ID) is shown

◉ FT8-Improved: Auto CQ answers callers while "Only Show CQ" or "Only Show Containing" is on; touch and hold the filter button to switch the filter on or off

◉ JS8: the correct grid locator is sent south of the equator

◉ Select Memory opens at the memory closest to the active slice

◉ PSK Reporter: changing the time, band or mode in the filter loads the list again

◉ Logbook: QSL "sent" marks of the iCloud log are no longer lost after an app update

◉ Alerts with states, grid locators or countries no longer ring for stations where these are unknown

◉ Antenna Genius with firmware 4.1.9: a tap selects the receive antenna, while transmitting the transmit antenna

◉ Power Genius XL: changing the remote access code works; Rotator Genius: rotator names are saved correctly

◉ Fixed: a crash when iOS started the app in the background

◉ Better VoiceOver support

◉ The manual has been updated

◉ Implemented some additional improvements and optimizations behind the scenes.


Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Some changes for iOS 27 compatibility

◉ Some DarkMode improvements

◉ Some Controller issues were fixed

◉ Implemented some additional improvements and optimizations behind the scenes.


Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Some changes for iOS 27 compatibility

◉ Some DarkMode improvements

◉ Some Controller issues were fixed

◉ Implemented some additional improvements and optimizations behind the scenes.


Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ New JS8 / JS8Call tool: chat with other stations over the air using your keyboard

◉ The new FT8-Improved tool is now available

◉ Some changes for iOS 27 compatibility

◉ The Keyboard Shortcut overview can now be displayed hitting the Cmd + ? keys

◉ Improved visualization of the TX status

◉ Implemented some additional improvements and optimizations behind the scenes.


Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE

This update contains the following changes and improvements:

◉ Added a Terminal mode for APRS. You can now connect to BBSes or start a keyboard-to-keyboard session with another ham radio operator.

◉ APRS can now auto-repeat position and status reports.

◉ The APRS RX button now indicates a transmission, providing clearer feedback.

◉ Additional APRS improvements and refinements.

◉ For the RIT/XIT view there is now a setting for defining minimum and maximum RIT/XIT values, improving support for satellite operation.

◉ Command Bar improvements.

◉ GPS/GNSS status, coordinates, and related information are now displayed in Radio Settings.

◉ Frequency Calibration in Radio Settings has been refined for radios equipped with GPSDO/GNSS.

◉ APD External Sampler settings have been added to Radio Settings.

◉ PTT Double-Tap has been removed for a better PTT button experience.

◉ Additional changes in preparation for an upcoming iOS release.

◉ Implemented some additional improvements and optimizations behind the scenes.


Kindly use the ‘CONTACT SUPPORT’ feature under Settings of the app in case of questions or issues. I will ensure your request is promptly answered or resolved.

Your continued support and valuable feedback play a crucial role in further improving this app.

73s,

Marcus, DL8MRE