DuctWise HVAC Duct Calculator のアイコン

DuctWise HVAC Duct Calculator

ユーティリティ 最終更新
App Store評価評価なし
品質スコア評価数不足
日本語なし英語
iPhone のみ対応 8.9MB 年齢4+

DuctWise HVAC Duct Calculatorはどんなアプリ?

DuctWise HVAC Duct Calculatorは、空調設備の配管サイズを計算するためのユーティリティです。 風量と摩擦率を入力すると、現場で実際に流通している丸形サイズの寸法や、そのサイズで流れる際の風速を算出できます。特定の空間に収める必要がある場合には、同じ風量を確保できる長方形や楕円形のサイズも提案されます。用途に合わせて設計範囲内の風速になっているかを確認できるため、工事の工程に応じた適切な選定が行えます。さらに、配管の全長と継手を含めた静圧の計算や、標高による空気密度の変化を考慮した補正も自動で行われます。 現場で取り扱えるサイズを正確に判断したいときや、設置場所の制約に合わせて形状を検討する際に便利です。ネット環境がない場所でも動作するため、工事現場での確認作業にも重宝します。

アノアプリによる紹介文です。デベロッパー公式の説明はApp Storeでご確認いただけます。

DuctWise HVAC Duct Calculatorの注目ポイント

在庫のある丸形サイズの算出
風量と摩擦率を入力すると、流通している規格に沿った丸形サイズが導き出されます。実際の現場で取り扱える寸法を正確に判断する際に助けになります。
設置場所に合う形状の提案
限られた空間に収める必要がある場合、同じ風量を維持できる長方形や楕円形のサイズを提示します。四比一を超える極端な形状は警告が表示されるため安心です。
用途に応じた風速の確認
寝室や店舗など設置場所の目的に応じて、設計範囲内の風速に収まっているか一目で判別できます。基準線との距離をグラフで表示し、適切な選定をサポートします。
配管全長と継手を含む静圧計算
直線部分だけでなく継手を含めた全長を入力すれば、システム全体でかかる静圧を算出します。標高による空気密度の変化も考慮した補正が自動で行われます。

価格履歴

今の価格は800円です。過去45日間、価格は変わっていません。

アノアプリが独自に収集した価格履歴をもとに分析しています。

買い時判定
通常価格
記録期間
45日
最頻価格
¥800
記録上の最安値
¥800

価格更新履歴

日付 価格
2026-10-03 ¥800

ランキング推移

ランキングデータがありません。
ランキング圏内(100位以内)に入ると記録が開始されます。

ユーティリティのランキングをもっと見る →

ユーザーレビュー (当サイト投稿)

まだレビューがありません。最初のレビューを書いてみましょう。

アプリ更新履歴 活発に更新中

Ver 1.4.1 2026-11-16
New in 1.4.1:
• Early access: see a short preview of the separate app for whole duct jobs (plan, test sheet, PDF) and sign up with your email.
• Quick questions are easier to answer: larger buttons, and an answer can take you straight to early access or the idea form.
Ver 1.4 2026-11-15
New in 1.4:
• Check the whole system: enter every supply and return run in the house and see if the ducts carry the air the equipment needs.
• Supply and return each get their own verdict, with how many CFM are missing.
• A new welcome screen, and feedback is easier: More › Suggest a feature takes a few taps. I read every message.
Ver 1.3 2026-11-08
New in 1.3:
• A quicker tour: three steps on the Size screen, from airflow to the duct you order, in under a minute.
• A short checklist at the foot of Size shows you the rest: try a fitting, save a run to your job, and check a duct that's already in.
• Smaller fixes and polish throughout.
Ver 1.2.2 2026-10-30
This update is built from your suggestions:
Square duct sizing. Size, Fit and Static are now steps of one run, with its settings always in view. A one-tap fix when the size is out of the band. Check duct and More are their own tabs. A Job you can reopen and rename. A 60-second guided first job.
Keep them coming: More → Suggest a feature.
Ver 1.2.1 2026-10-27
• Sizes beyond the largest duct in the table now show a clear message instead of being capped silently.
• Cleaned up the flat-oval size list.
Ver 1.2 2026-10-20
New in 1.2:
• Fit: see whether the duct fits your joist bay or ceiling space, and the shape to run instead when it doesn't (rectangular, flat oval, or two runs).
• Static: turn your blower's available static into the friction rate to size with, and see what's left for the run.
• Flex or metal: size flex duct at its real roughness and see the metal equivalent.
• Job: save each run, keep the list per job, and share a one-page duct schedule PDF.
• The first screen is clearer: one stocked size, the band check, then your inputs.
Ver 1.1 2026-10-07
New: fits the bay. See a to-scale joist bay with the duct shape that fits, or a split.
New: static budget. The blower's rated static minus losses gives the friction rate to size at.
New: flex or metal, sized with real friction.
New: job list with totals and a one-page PDF duct schedule. Fixed a bug where saved friction was reset.
Ver 1.0.1 2026-09-28
New app icon. Small fixes and polish.

同じ開発者のアプリ