¥500
App Store で開く
iPhone / iPad 対応
6.5MB
年齢4+
MagStud Pro: Stud Finderはどんなアプリ？
MagStud Pro: Stud Finderは、壁の裏にある柱や構造物の位置を特定する際に役立つツールです。
磁気センサーの反応を振動と音で検知するため、手に持ったまま正確な反応を捉えられます。測定した結果には名前をつけて保存でき、複数の数値を比較して柱の間隔を推測する機能も備わっています。調査内容を写真や音声メモとともに記録できるため、現場の状況を詳細に残せます。
工事の前に壁の構造を正確に把握したい時や、下地材の位置を正確に特定したい場面で頼りになります。壁の調査結果を整理して報告書として書き出したい職人の方も、このアプリで記録を管理できます。
アノアプリによる紹介文です。デベロッパー公式の説明はApp Storeでご確認いただけます。
MagStud Pro: Stud Finderの注目ポイント
測定結果の名称保存
壁の測定結果に名前を付けて保存できるため、複数の現場や場所を区別して管理できます。過去の記録を振り返る際も、特定の名称から探し出せるのでスムーズです。
振動と音による検知
磁気センサーの反応を振動と音で検知する仕組みが入っています。手元で感度を捉えながら作業を進めるため、画面を注視する時間を減らして正確な位置を特定できます。
複数箇所の比較と推測
複数の計測値を突き合わせて柱の間隔を推測する機能があります。隣り合う構造物の間隔を計算し、壁の裏に隠れた部材の配置を予測する際に役立ちます。
写真や音声による記録
調査の際に撮影した写真や音声メモを一緒に保存できます。現場の状況を視覚や音で残せるため、後から報告書を作成する際に正確な情報を反映させられます。
価格履歴
現在は500円です。記録を始めた90日前から、価格は変わっていません。
アノアプリが独自に収集した価格履歴をもとに分析しています。
- 買い時判定
- 通常価格
- 記録期間
- 90日
- 最頻価格
- ¥500
- 記録上の最安値
- ¥500
価格更新履歴
| 日付 | 価格 |
|---|---|
| 2026-08-13 | ¥500 |
ランキング推移
ランキングデータがありません。
ランキング圏内（100位以内）に入ると記録が開始されます。
ユーザーレビュー （当サイト投稿）
まだレビューがありません。最初のレビューを書いてみましょう。
アプリ更新履歴 活発に更新中
Ver 4.0 2026-11-10
MagStud Pro 4.0
• Spacing estimate: Wall Survey estimates the on-centre spacing from marks that repeat on both passes and projects the next positions.
• Survey in inches or centimetres.
• Sweep marks are now saved to the Journal with peak, ambient offset and duration. Marks saved by earlier versions without a session are gathered into one labelled session.
• Backup and restore for wall surveys, plus CSV export for surveys and the Journal.
• New Tools tab with all 16 tools grouped, and a working back button in every tool.
• The AC tools are now an experimental ripple indicator: they use the measured sensor rate, say when 50/60 Hz cannot be measured, and never show "clear" or "safe".
• The Wall Type classifier was removed because its material profiles were not supported by measurements.
• Framing reference notes corrected against IRC Table R602.3(5).
• Larger text support and higher-contrast labels.
• Spacing estimate: Wall Survey estimates the on-centre spacing from marks that repeat on both passes and projects the next positions.
• Survey in inches or centimetres.
• Sweep marks are now saved to the Journal with peak, ambient offset and duration. Marks saved by earlier versions without a session are gathered into one labelled session.
• Backup and restore for wall surveys, plus CSV export for surveys and the Journal.
• New Tools tab with all 16 tools grouped, and a working back button in every tool.
• The AC tools are now an experimental ripple indicator: they use the measured sensor rate, say when 50/60 Hz cannot be measured, and never show "clear" or "safe".
• The Wall Type classifier was removed because its material profiles were not supported by measurements.
• Framing reference notes corrected against IRC Table R602.3(5).
• Larger text support and higher-contrast labels.
Ver 3.0.2 2026-10-06
Updated App Store details. No other changes in this update.
Ver 3.0.1 2026-10-01
A clearer App Store name and search details. No other changes in this update.
Ver 3.0 2026-09-14
Wall Survey
Wall Survey keeps measured wall observations in a saved notebook and compares two passes from the same reference edge.
1. Open Survey and create a wall with a name and measured span.
2. Add observations for pass 1 and pass 2 using distances you measure along the wall. Add a live magnetic reading when supported.
3. Choose a matching tolerance, inspect paired and unmatched marks, then share the survey or reopen it later.
Distances are entered measurements, not motion tracking. A repeated signal is not proof of a stud or a safe drilling location. The app cannot rule out hidden electrical, plumbing, gas or other services. Use suitable tools before drilling. Devices without a magnetometer support manual surveys and show an unavailable-sensor message.
Wall Survey keeps measured wall observations in a saved notebook and compares two passes from the same reference edge.
1. Open Survey and create a wall with a name and measured span.
2. Add observations for pass 1 and pass 2 using distances you measure along the wall. Add a live magnetic reading when supported.
3. Choose a matching tolerance, inspect paired and unmatched marks, then share the survey or reopen it later.
Distances are entered measurements, not motion tracking. A repeated signal is not proof of a stud or a safe drilling location. The app cannot rule out hidden electrical, plumbing, gas or other services. Use suitable tools before drilling. Devices without a magnetometer support manual surveys and show an unavailable-sensor message.
Ver 2.1 2026-08-21
Wall Evidence is a new Pro tool for repeat-pass wall surveys. Score peak repeatability and survey confidence, compare a baseline against a what-if scenario, import pass-measurement CSV, and export a no-drill brief as text or PDF. Records stay on this device.
Sweep now shows the named sensitivity profile next to the live threshold. Open Wall Evidence from Pro Tools or Settings.
Sweep now shows the named sensitivity profile next to the live threshold. Open Wall Evidence from Pro Tools or Settings.
Ver 2.0.1 2026-06-26
This update sharpens the interface: the iPad layout now uses a centered, comfortable reading width instead of stretching edge to edge, plus small display fixes. iPhone is unchanged.
