¥500
（通常 ¥600）
App Store で開く
アプリ内課金あり
iPhone / iPad 対応
94.7MB
年齢4+
IFC Viewerはどんなアプリ？
IFC Viewerは、建築や土木などの設計現場で使われるIFCモデルを三次元的に閲覧するツールです。
建物や階層の構成要素を詳細に確認できるため、特定のオブジェクトを選んで個別に調査することもできます。複数のモデルを一つに統合して確認する機能が含まれており、図面の整合性を確かめる際に便利です。数量の算出や干渉のチェックなど、高度な分析に必要な機能も使い分けることで必要な情報を正確に把握できます。
現場での打ち合わせや会議の際に、手元でモデルを動かしながら確認したい場面にぴったりです。設計の変更点を確認したり、工事の進捗を管理する担当者が図面を詳しく精査する際に頼りになります。
アノアプリによる紹介文です。デベロッパー公式の説明はApp Storeでご確認いただけます。
IFC Viewerの注目ポイント
三次元的なモデル閲覧
iPhoneやiPad、Macの端末でIFCモデルを立体的に見つめられます。設計現場の図面を空間として把握したいときに便利です。
構成要素と数量の確認
建物や階層に含まれる部材の数や属性を詳細に確認できます。図面から正確な数量を導き出す工程をスムーズに進められます。
特定オブジェクトの抽出
必要な要素を検索して取り出し、個別に調査する操作が行えます。膨大なデータの中から特定の箇所だけを抜き出して詳しく調べられます。
複数のモデル統合と確認
複数のモデルをひとつの空間にまとめて確認できます。異なる図面同士の整合性を照らし合わせる際に頼りになります。
価格履歴
現在は500円です。過去106日間では、この価格だった期間が最も長くなっています。この間に値下げが1回ありました。値上げはありません。
アノアプリが独自に収集した価格履歴をもとに分析しています。
- 買い時判定
- 通常価格
- 直前の価格から
- 17%オフ
- 最頻価格
- ¥500
- 記録上の最安値
- ¥500
価格更新履歴
| 日付 | 価格 |
|---|---|
| 2026-07-25 | ¥500 |
| 2026-07-19 | ¥600 |
ランキング推移
ランキングデータがありません。
ランキング圏内（100位以内）に入ると記録が開始されます。
ユーザーレビュー （当サイト投稿）
まだレビューがありません。最初のレビューを書いてみましょう。
アプリ更新履歴 活発に更新中
Ver 5.2 2026-10-18
Introducing Project Audit & Evidence Pack — a new way to turn IFC model checks into a reviewable record.
• Run Model Health on its own or combine Model Health, IDS Validation and Coordinate Checker in one audit.
• Choose an IFC revision and IDS ruleset, with separate source fingerprints and clear verification status.
• Review findings and evaluation coverage, with honest pass, warning, failure and incomplete outcomes.
• Save audit history and reopen previous results without rerunning the checks.
• Export a validated ZIP containing a PDF report, CSV findings, JSON results and a SHA-256 manifest.
Also improved:
• IDS importing from file providers, including Google Drive on Mac.
• Model and revision selection when files share the same name.
• Unlock All discovery on the iPhone Workspace for customers who have not purchased the full toolset.
• General usability and file-handling refinements across iPhone, iPad and Mac.
Project Audit is included for Unlock All owners and customers who own all 14 original Pro Tools. No separate Project Audit purchase is required for eligible owners.
Results reflect supported model checks and available data; incomplete coverage is clearly reported rather than treated as a pass.
• Run Model Health on its own or combine Model Health, IDS Validation and Coordinate Checker in one audit.
• Choose an IFC revision and IDS ruleset, with separate source fingerprints and clear verification status.
• Review findings and evaluation coverage, with honest pass, warning, failure and incomplete outcomes.
• Save audit history and reopen previous results without rerunning the checks.
• Export a validated ZIP containing a PDF report, CSV findings, JSON results and a SHA-256 manifest.
Also improved:
• IDS importing from file providers, including Google Drive on Mac.
• Model and revision selection when files share the same name.
• Unlock All discovery on the iPhone Workspace for customers who have not purchased the full toolset.
• General usability and file-handling refinements across iPhone, iPad and Mac.
Project Audit is included for Unlock All owners and customers who own all 14 original Pro Tools. No separate Project Audit purchase is required for eligible owners.
Results reflect supported model checks and available data; incomplete coverage is clearly reported rather than treated as a pass.
Ver 5.1 2026-10-15
**What's New in Version 5.1**
We've given IFC Viewer's Pro Tools experience a fresh new look!
• **Discover more:** A redesigned Workspace promotion makes it easier to explore powerful professional IFC tools.
• **Unlock All, reimagined:** A vibrant new design showcases Clash Detection, Quantity Takeoff, Model Compare, Federation and more — all available with one one-time purchase and no subscription.
• **Improved purchasing experience:** Clearer pricing information and better recovery when App Store product details are temporarily unavailable.
The same powerful IFC tools, now with a more polished and engaging experience.
We've given IFC Viewer's Pro Tools experience a fresh new look!
• **Discover more:** A redesigned Workspace promotion makes it easier to explore powerful professional IFC tools.
• **Unlock All, reimagined:** A vibrant new design showcases Clash Detection, Quantity Takeoff, Model Compare, Federation and more — all available with one one-time purchase and no subscription.
• **Improved purchasing experience:** Clearer pricing information and better recovery when App Store product details are temporarily unavailable.
The same powerful IFC tools, now with a more polished and engaging experience.
Ver 5.0 2026-10-13
**What's New in Version 5.0**
A major update to IFC Viewer's 3D viewing technology, with improvements to model information, clash reporting and overall reliability.
• **Upgraded 3D Viewer** – Updated our That Open rendering engine with newer Components and Fragments technology, providing a modernised foundation for viewing IFC models.
• **Improved IFC Element Identification** – Enhanced IFC class, GlobalId and property handling for more accurate element identification.
• **Enhanced Clash Detection** – Improved clash result information, element identification and BCF exports, including more complete model and component references.
• **Improved Federation Information** – Refined element metadata handling across federated IFC models.
• **Stability and Compatibility** – Under-the-hood improvements to the viewing infrastructure while maintaining support for existing tools and add-ins.
Thank you for using IFC Viewer! We're continuing to develop new features and improvements to make working with IFC models even better.
A major update to IFC Viewer's 3D viewing technology, with improvements to model information, clash reporting and overall reliability.
• **Upgraded 3D Viewer** – Updated our That Open rendering engine with newer Components and Fragments technology, providing a modernised foundation for viewing IFC models.
• **Improved IFC Element Identification** – Enhanced IFC class, GlobalId and property handling for more accurate element identification.
• **Enhanced Clash Detection** – Improved clash result information, element identification and BCF exports, including more complete model and component references.
• **Improved Federation Information** – Refined element metadata handling across federated IFC models.
• **Stability and Compatibility** – Under-the-hood improvements to the viewing infrastructure while maintaining support for existing tools and add-ins.
Thank you for using IFC Viewer! We're continuing to develop new features and improvements to make working with IFC models even better.
Ver 4.1 2026-10-12
**What's New in Version 4.1**
This update focuses on simplifying IFC Viewer and improving the foundation for future enhancements.
• **Streamlined 3D Viewer** – Removed the legacy Classic Viewer, making That Open our dedicated 3D rendering engine.
• **Improved Reliability** – Refined viewer recovery and Safe Mode handling for a more consistent experience when opening IFC models.
• **Smaller App Size** – Removed obsolete rendering components and unnecessary resources.
• **Continued Feature Support** – Maintained compatibility with model federation, Quantity Takeoff, Clash Detection, Model Compare and existing viewer tools.
Thank you for using IFC Viewer! More exciting improvements are on the way.
This update focuses on simplifying IFC Viewer and improving the foundation for future enhancements.
• **Streamlined 3D Viewer** – Removed the legacy Classic Viewer, making That Open our dedicated 3D rendering engine.
• **Improved Reliability** – Refined viewer recovery and Safe Mode handling for a more consistent experience when opening IFC models.
• **Smaller App Size** – Removed obsolete rendering components and unnecessary resources.
• **Continued Feature Support** – Maintained compatibility with model federation, Quantity Takeoff, Clash Detection, Model Compare and existing viewer tools.
Thank you for using IFC Viewer! More exciting improvements are on the way.
Ver 4.0 2026-10-11
IFC Viewer 4.0 is built for iPhone Duo.
Open the model on the cover. Unfold it across both screens. Fold it back and the same model is still there — no re-import, no lost selection.
The viewer follows the device: closed, partially open, fully open, portrait or landscape. Quantity Takeoff, Clash Detection, Model Compare and Federator keep the model you already loaded. Existing tool purchases and Unlock All restore as before.
£2.99 opens the model. £24.99 unlocks all 14 tools, once. Local. No subscription.
A desktop BIM licence does not fold into your pocket. This does.
Open the model on the cover. Unfold it across both screens. Fold it back and the same model is still there — no re-import, no lost selection.
The viewer follows the device: closed, partially open, fully open, portrait or landscape. Quantity Takeoff, Clash Detection, Model Compare and Federator keep the model you already loaded. Existing tool purchases and Unlock All restore as before.
£2.99 opens the model. £24.99 unlocks all 14 tools, once. Local. No subscription.
A desktop BIM licence does not fold into your pocket. This does.
Ver 3.1 2026-10-05
What’s New in Version 3.1
A major upgrade to IFC Quantity Takeoff.
Quantity Takeoff is now a fully interactive 3D workflow directly inside IFC Viewer.
- Measure Distance, Polyline Length and Area directly from your IFC model
- Snap accurately to vertices, edges and faces
- Calculate Face Area, Object Surface Area and validated Geometry Volume
- Count selected IFC objects and create multi-object takeoffs
- Improved Material Takeoff with model-based selection and grouping
- Compare IFC quantities with geometry-derived measurements while keeping their source clearly identified
- Add measurements and geometry quantities directly to your Takeoff Basket
- Persistent takeoff items, measurements, notes and annotations
- Improved CSV export
- Better integration between Quantity Takeoff and the main 3D Viewer
- Improved model handling when switching between Pro Tools
- Performance, stability and reliability improvements across iPhone, iPad and Mac
IFC Viewer 3.1 makes Quantity Takeoff a true model-based workflow — inspect, select, measure and quantify your IFC model without leaving the Viewer.
A major upgrade to IFC Quantity Takeoff.
Quantity Takeoff is now a fully interactive 3D workflow directly inside IFC Viewer.
- Measure Distance, Polyline Length and Area directly from your IFC model
- Snap accurately to vertices, edges and faces
- Calculate Face Area, Object Surface Area and validated Geometry Volume
- Count selected IFC objects and create multi-object takeoffs
- Improved Material Takeoff with model-based selection and grouping
- Compare IFC quantities with geometry-derived measurements while keeping their source clearly identified
- Add measurements and geometry quantities directly to your Takeoff Basket
- Persistent takeoff items, measurements, notes and annotations
- Improved CSV export
- Better integration between Quantity Takeoff and the main 3D Viewer
- Improved model handling when switching between Pro Tools
- Performance, stability and reliability improvements across iPhone, iPad and Mac
IFC Viewer 3.1 makes Quantity Takeoff a true model-based workflow — inspect, select, measure and quantify your IFC model without leaving the Viewer.
Ver 3.0.1 2026-09-29
What’s New in Version 3.0.1
Reliability and Pro Tools improvements
Fixed an issue where IFC Quantity Takeoff could show “No IFC loaded” even when a model was already open in IFC Viewer.
Improved IFC handoff between the Viewer and embedded Pro Tools.
Improved direct IFC importing in Quantity Takeoff on macOS.
Improved model-source reliability when moving between tools such as Clash Detection, Model Compare, Federator and Quantity Takeoff.
Improved Clash Detection reliability when reopening the tool or switching between Pro Tools.
Improved handling of large IFC models.
Additional stability, navigation and file-management improvements across iPhone, iPad and Mac.
We’ve also completed extensive regression testing across the Viewer and Pro Tools as part of this update.
Reliability and Pro Tools improvements
Fixed an issue where IFC Quantity Takeoff could show “No IFC loaded” even when a model was already open in IFC Viewer.
Improved IFC handoff between the Viewer and embedded Pro Tools.
Improved direct IFC importing in Quantity Takeoff on macOS.
Improved model-source reliability when moving between tools such as Clash Detection, Model Compare, Federator and Quantity Takeoff.
Improved Clash Detection reliability when reopening the tool or switching between Pro Tools.
Improved handling of large IFC models.
Additional stability, navigation and file-management improvements across iPhone, iPad and Mac.
We’ve also completed extensive regression testing across the Viewer and Pro Tools as part of this update.
Ver 3.0 2026-09-19
A major update to IFC Viewer, rebuilt around a new professional workspace.
• A redesigned Workspace for faster access to projects, models and review tools
• Improved IFC loading, viewing, framing and model navigation
• More reliable multi-model and coordination workflows
• Improved element selection and IFC property inspection
• 14 professional Pro Tools brought together within IFC Viewer
• Expanded tools for coordination, quantities, QA, IDS, COBie, BCF, model data and more
• Updated Pro Tools interface and visual design
• Improved project and Quick View workflows
• New integrated access to IFCViewer.co.uk, support and product updates
• Extensive stability, compatibility and usability improvements across iPhone, iPad and Mac
This update lays the foundation for a more capable IFC workspace while keeping IFC model review focused, practical and accessible.
• A redesigned Workspace for faster access to projects, models and review tools
• Improved IFC loading, viewing, framing and model navigation
• More reliable multi-model and coordination workflows
• Improved element selection and IFC property inspection
• 14 professional Pro Tools brought together within IFC Viewer
• Expanded tools for coordination, quantities, QA, IDS, COBie, BCF, model data and more
• Updated Pro Tools interface and visual design
• Improved project and Quick View workflows
• New integrated access to IFCViewer.co.uk, support and product updates
• Extensive stability, compatibility and usability improvements across iPhone, iPad and Mac
This update lays the foundation for a more capable IFC workspace while keeping IFC model review focused, practical and accessible.
Ver 2.15 2026-08-23
**What’s New in Version 2.15**
We’re continually improving IFC Viewer based on real-world use and customer feedback. Version 2.15 focuses heavily on stability, reliability and making the viewer more dependable across iPhone, iPad and Mac.
* Improved 3D navigation and camera stability during extended model exploration.
* Improved handling of large, complex and multi-model IFC projects.
* More accurate model loading, readiness and visible-model status.
* Improved Fit All and model re-entry behaviour.
* Improved object selection and Data inspection across multiple models.
* Better handling of models with large or widely separated coordinates.
* Improved Data layouts when using larger Accessibility text sizes.
* Improved purchase, entitlement and Restore Purchases reliability.
* Numerous performance, usability and stability improvements throughout the app.
We’re committed to continually developing IFC Viewer, listening to customer feedback and making regular improvements to the viewing and openBIM workflow.
Thank you for using IFC Viewer and for continuing to help us make it better.
We’re continually improving IFC Viewer based on real-world use and customer feedback. Version 2.15 focuses heavily on stability, reliability and making the viewer more dependable across iPhone, iPad and Mac.
* Improved 3D navigation and camera stability during extended model exploration.
* Improved handling of large, complex and multi-model IFC projects.
* More accurate model loading, readiness and visible-model status.
* Improved Fit All and model re-entry behaviour.
* Improved object selection and Data inspection across multiple models.
* Better handling of models with large or widely separated coordinates.
* Improved Data layouts when using larger Accessibility text sizes.
* Improved purchase, entitlement and Restore Purchases reliability.
* Numerous performance, usability and stability improvements throughout the app.
We’re committed to continually developing IFC Viewer, listening to customer feedback and making regular improvements to the viewing and openBIM workflow.
Thank you for using IFC Viewer and for continuing to help us make it better.
Ver 2.14 2026-08-11
This update introduces BCF Everywhere, making it much easier to turn findings from your IFC workflows into structured, reviewable BCF issues.
• New Create BCF actions across supported IFC analysis tools
• Create BCF issues from Clashes and Clearance Failures
• Create issues from IDS validation findings
• Create issues from Model Health and QA findings
• Create issues from Coordinate Checker results
• Create issues from Model Compare changes
• Create issues from selected Query Studio results
• Support for COBie and Data Compliance findings
• New Finding Inbox for collecting, reviewing and managing findings before creating issues
• Select and convert multiple findings into BCF issues in one workflow
• Create a new BCF project from findings or add findings to an existing BCF project
• Preserve available IFC components, viewpoints and snapshots within BCF issues
• Improved duplicate detection and BCF round-trip compatibility
• Further BCF import/export, reliability and performance improvements across iPhone, iPad and Mac
Existing BCF Issue Tracker owners receive these new capabilities automatically, and they remain included with Unlock All — no additional purchase is required.
Thank you for your continued feedback, reviews and support. Your suggestions continue to shape IFC Viewer.
• New Create BCF actions across supported IFC analysis tools
• Create BCF issues from Clashes and Clearance Failures
• Create issues from IDS validation findings
• Create issues from Model Health and QA findings
• Create issues from Coordinate Checker results
• Create issues from Model Compare changes
• Create issues from selected Query Studio results
• Support for COBie and Data Compliance findings
• New Finding Inbox for collecting, reviewing and managing findings before creating issues
• Select and convert multiple findings into BCF issues in one workflow
• Create a new BCF project from findings or add findings to an existing BCF project
• Preserve available IFC components, viewpoints and snapshots within BCF issues
• Improved duplicate detection and BCF round-trip compatibility
• Further BCF import/export, reliability and performance improvements across iPhone, iPad and Mac
Existing BCF Issue Tracker owners receive these new capabilities automatically, and they remain included with Unlock All — no additional purchase is required.
Thank you for your continued feedback, reviews and support. Your suggestions continue to shape IFC Viewer.
